RESIN 055 is a structural polyurethane foam which - injected into voids beneath concrete slabs, walkways, foundations, walls, etc. - stabilizes the underground and lifts it to the desired height without excavation.
Learn More

SL resin 50 CF (Cavity Filling) is a structural two-component polyurethane foam system, designed for undersealing and void filling under concrete slab sections. The slow speed reactivity profile allows for excellent flow characteristics when used as an undersealing and void fill material. It will run and level itself and expand slowly with low heat.
Learn More

SL resin 50 is a structural low expansion 2 part high density PU polymer specifically designed to be used in the Ground Engineering civil sector, which - injected into voids beneath concrete slabs, pavements, foundations, walls, etc., - fills the voids, expands modestly and structurally supports structures to design strength. If injected into confined areas (in ground) below structures it will compact the ground and exert modest lift if confined.
Learn More

Hydrophilic & Solvent free low viscosity polyurethane injection system for moving & nonstructural cracks
Learn More

1component, solvent free, polyurethane injection system, injected with a two component pump with water as the second component. It produces a tough, flexible polyurethane foam or an elastomeric gel or soft gel, depending on the amount of water added. Possible applications: expansion joints, heavy water leakages, screen injections,
Learn More

Single Component Hydrophobic type PU Avinject AVK-200 is a hydrophobic grout based on polyurethane. Upon contact with water, AVK-200 reacts to closed cell rubber-like foam while expanding its volume up to 27times. The cured material is of a constant volume. Since water is not a component of the foam structure, the cured material is essentially not affected by water or dryness. The reacted material does not shrink or swell. Depending on the pressure of injection, AVK-200 reacts to a very dense material or foam.
Learn More

One component solvent free polyurethane injection system .Reaction with yields a semi rigid polyurethane foam which is to be injected with 1C injection pump & with use of 6-10% of catalyst.
Learn More

A fast reacting two component polyurethane injection system, CFC & halogen free. For sealing and hardening in water—carrying zones, particularly against pressurized water.
Learn More

A fast reacting two component polyurethane injection system, CFC & halogen free.
Learn More

One component, solvent free, polyurethane injection system ideally suitable for crack injection/water leaks in concrete and masonry structures. Reaction with water yields a flexible polyurethane foam. To be injected with a one—component pump. Use with 6 to 10% catalyst.
Learn More